Decision intelligence, applied where it matters

Twelve families of consequential supply-chain decisions. Governed end to end.

Aidecis is the decision intelligence layer for supply chain.

Each decision below is taken today by people, by your own algorithms or by a vendor's agent, and often by all three. Aidecis governs each one end to end, from the signal to the outcome, under one authority model, and links the decisions a change sets off next. Each case says how far it can move up the autonomy scale, and the one measure a pilot is judged on.

The decision, end to end

Context in. Governed action out. Evidence all the way through.

  1. Signal + context
  2. AI analysis + options
  3. Human / bot authority
  4. Approval + scoped action
  5. Outcome + learning

Decision-effectiveness scorecard

One scorecard for every case, so pilots can be compared.

Each use case below lists what gets measured under the same four groups. These are the measures a pilot is judged on, set against your own baseline.

Decision map · reference case

A late PO line, from signal to customer promise.

One change followed across the chain, with the registered actor and the system connection at each step, and the decisions it opens next. Illustrative example: names, limits and amounts are set with each client.

  1. Signal

    A supplier confirms a purchase-order line late and above the agreed price, past the material cut-off for a production order.

    Actor
    The supplier; the buyer in SAP
    System
    SAP purchasing, read only
  2. Context

    Aidecis links the PO line to material availability, the production order it feeds and the customer promise downstream, and prices the options against the contract and budget.

    Actor
    Aidecis prepares the brief; it does not decide
    System
    SAP (purchasing, MARD, RESB), read only
  3. Applicable policy

    The delegation-of-authority policy sets who may accept the change, the price envelope per line and the total commitment above which it escalates.

    Actor
    Policy set by the client's supply-chain director
    System
    Client policy and limits held in Aidecis
  4. Accountable owner

    The brief goes to the buyer whose envelope covers it; above it, the category manager. The approval, the option chosen and the reason are recorded.

    Actor
    Named buyer or category manager
    System
    Aidecis decision record
  5. Scoped action, and the chain it opens

    Enforced: your integration checks the single-use grant, then executes the approved PO amendment in SAP; Aidecis reads it back and reconciles it. Observed: a vendor's agent that amends in SAP directly is read back and flagged against the envelope. The shortfall opens a production reschedule and a customer-promise check, each with its own owner.

    Actor
    The buyer or your integration, or the vendor's registered agent
    System
    SAP purchasing
  6. Verified outcome

    Aidecis follows the chain to the production order and the customer promise, and checks the later supplier invoice against the approved grant, measuring the outcome of the whole chain.

    Actor
    Buyer; production and commercial owners; finance for the invoice
    System
    SAP, read back

Inventory · allocation

Inventory reallocation

The decisionStock runs short at one site while another holds a surplus. Moving it costs transport and may leave the sending site short.

Who takes partSite planners and the supply planner; replenishment rules and the ERP's transfer proposals; a planning vendor's optimiser.

What Aidecis doesRanks the receiving sites by service risk, protects minimum stock and reserved orders at the sending site, and, after approval, grants the transfer, which your WMS or ERP integration checks before it executes (enforced control). A transfer the optimiser books on its own is read back, checked against its limit and flagged when it goes over (observed control).

How far it can goLevel 2 is realistic early: the optimiser proposes, a planner approves above a set quantity.

The measureStockout hours at the receiving site. Also: fill rate, transfer cost, policy exceptions.

Opens nextA customer-promise change if cover still falls short at the receiving site.

Scorecard

Latency
Time from shortage signal to approved transfer
Quality
Policy exceptions
Adoption
Share of transfers decided on the brief
Outcome
Stockout hours at the receiving site; fill rate; transfer cost

Planning · allocation

Demand surge allocation

The decisionA demand spike or a large order exceeds the supply available to promise, and someone decides which customers get what.

Who takes partDemand and supply planners, and the commercial owners; the allocation engine in the planning system.

What Aidecis doesCompares allocation options on customer commitments, margin, strategic rules and fairness, records who approved each change to a customer promise, and updates planning or the ERP only after approval.

How far it can goLevel 1 to 2. A customer promise is a commercial decision, and a person stays accountable for it.

The measureOn-time-in-full for the affected customers. Also: revenue protected, allocation overrides.

Opens nextA customer promise and backorder priority for the orders that have to wait.

Scorecard

Latency
Time from surge to approved allocation
Quality
Allocation overrides
Adoption
Share of allocation changes approved in the flow
Outcome
On-time-in-full for the affected customers; revenue protected

Procurement · resilience

Supplier disruption and alternate source

The decisionA supplier is late, cuts capacity, or is hit by a credit alert or a geopolitical event. Buying elsewhere costs a premium and needs a qualified source.

Who takes partBuyers, quality and the plant; the sourcing rules in the ERP; a procurement vendor's sourcing agent that may place the order itself.

What Aidecis doesMaps the affected materials and plants, compares approved alternates on lead time, price and qualification status, asks quality and procurement to approve, and grants the purchase-order change only within the approved scope (enforced control). An order a vendor's agent places directly is read back and checked against its cap and the approved-supplier list (observed control).

How far it can goLevel 1 to 2. Procurement is where vendors' agents arrive first, so this is often where observed control starts.

The measureDays of cover protected. Also: premium purchase cost, time to qualify an alternate.

Opens nextA quality review of the alternate source, and a production reschedule.

Scorecard

Latency
Time to qualify an alternate
Quality
Orders outside the cap or the approved-supplier list
Adoption
Share of supplier disruptions handled in the flow
Outcome
Days of cover protected; premium purchase cost

Quality · disposition

Quality hold, release or substitute

The decisionA QMS hold, a lab result or a nonconformance blocks a lot. Releasing, reworking or substituting it touches safety, compliance and customer orders.

Who takes partQuality assurance and the operations owners; the rules in the QMS and the laboratory system.

What Aidecis doesLinks the affected lots and orders to the customers downstream, blocks any release the rules do not allow, routes the disposition to the authorised quality owners and records the evidence behind every release or substitution.

How far it can goLevel 1. A release stays with a person; Aidecis makes it faster and fully evidenced, not automatic.

The measureTime to disposition. Also: affected volume, compliance deviations.

Opens nextA customer-promise change for the orders the held lot was meant for.

Scorecard

Latency
Time to disposition
Quality
Compliance deviations
Adoption
Share of dispositions recorded with their evidence
Outcome
Affected volume

Manufacturing · recovery

Production rescheduling

The decisionA machine stops, a team is short or material is missing, and the schedule has to change without breaking the commitments downstream.

Who takes partProduction planners and the production owner; the scheduler in the APS or MES.

What Aidecis doesCompares feasible schedules and their downstream effects within the labour, maintenance, quality and customer constraints, asks the production owner to approve, and then grants the approved change, which your MES or APS integration checks before it executes (enforced control).

How far it can goLevel 2 for routine changes inside a set envelope; larger changes stay with the production owner.

The measureTime to a recovered plan. Also: schedule adherence, changeover loss, overtime.

Opens nextA customer-promise change, and an expedite to protect the date.

Scorecard

Latency
Time to a recovered plan
Quality
Changes outside the approved envelope
Adoption
Share of schedule changes approved in the flow
Outcome
Schedule adherence; changeover loss; overtime

Logistics · routing

Logistics reroute or carrier choice

The decisionPort congestion, weather or a carrier failure disrupts a lane, and the freight has to move another way.

Who takes partLogistics planners; the routing rules in the TMS; a forwarder's or visibility platform's agent that proposes or books reroutes.

What Aidecis doesCompares route and carrier options on service, cost, emissions and contract terms, checks the approved-carrier list and the site caps, and grants exactly the approved booking change, which your TMS integration checks before it executes (enforced control). A reroute a forwarder's agent books on its own is read back and flagged when it breaks the contract or the cap (observed control).

How far it can goLevel 2 within contracted carriers and a cost cap.

The measureResponse time from disruption to booked reroute. Also: transit time, premium cost.

Opens nextAn invoice variance check on the premium that was booked.

Scorecard

Latency
Response time from disruption to booked reroute
Quality
Reroutes flagged against the contract or the cap
Adoption
Share of reroutes decided on the brief
Outcome
Transit time; premium cost

Customer service · prioritisation

Customer promise and backorder priority

The decisionSupply falls short, or a priority order risks missing its date, and someone decides whose delivery moves.

Who takes partCustomer service and the commercial owners; the order-promising rules in the ERP.

What Aidecis doesShows the affected customers and order dependencies, applies the client's priority policy, proposes new dates, splits or substitutions, and asks an authorised commercial owner to approve.

How far it can goLevel 1 to 2. Who waits is a commercial choice, and a person stays accountable for it.

The measurePromise accuracy for the affected orders. Also: on-time-in-full, override rate.

Opens nextAn inventory reallocation or an expedite to hold the date.

Scorecard

Latency
Time from shortfall to a new promise
Quality
Override rate
Adoption
Share of priority changes approved in the flow
Outcome
Promise accuracy for the affected orders; on-time-in-full

Logistics · dossier

Expedite freight after disruption

The decisionA late arrival puts a production line or a customer order at risk. A carrier quotes an expedite, and someone has to decide whether the premium is worth it.

Who takes partThe planner and the logistics manager; the carrier-booking rules in the TMS; more and more often, a carrier's or visibility platform's agent that proposes the expedite.

What Aidecis doesPrepares one brief with the options against the total cost of the disruption and the past outcomes at the site, and routes it to the person whose limit covers it. The planner books it in the TMS, and Aidecis reads the booking back and reconciles it against the approval; with enforced control, your TMS integration checks the single-use grant for exactly the approved booking before it books. The invoice is later checked against that approval.

How far it can goStarts at autonomy level 1: agents prepare, a person decides. Small, reversible expedites under a tight cap can move to level 2 or 3 once the record shows they hold.

The measurePremium freight spend per month against the baseline. Also: line-stoppage hours avoided, time to decision, invoice variance.

Opens nextAn invoice variance check against the approved grant when the carrier bills.

Scorecard

Latency
Time to decision
Quality
Invoice variance against the approved grant
Adoption
Share of expedites decided on the brief
Outcome
Premium freight spend per month; line-stoppage hours avoided

Finance · reconciliation · later phase

Invoice variance, claim and close-out

The decisionAn invoice differs from the quote, the order, the receipt or the approved expedite.

Who takes partAccounts payable and the finance controllers; the matching rules in the ERP; an invoice-processing vendor's agent that may release payments.

What Aidecis doesMatches the invoice against the approved decision and what actually executed, sends differences outside the tolerance to finance, prepares the evidence for a claim or chargeback, and closes the case only after reconciliation. A payment an agent releases on its own is checked against the tolerance (observed control).

How far it can goLevel 3 is realistic early for small differences inside the tolerance: the check rests on facts the decision record already holds.

The measureLeakage recovered per month. Also: claim success, days to close.

Opens nextA supplier claim or chargeback, and the close-out.

Scorecard

Latency
Days to close
Quality
Claim success
Adoption
Share of invoices matched against the decision record
Outcome
Leakage recovered per month

Maintenance · asset failure

Unplanned failure: run reduced or stop to repair

The decisionA priority-1 notification on a critical asset, such as a seal leak on a refinery feed pump, with the spare part days away.

Who takes partThe site owner, maintenance and operations; the maintenance system and its work-order rules.

What Aidecis doesCompares running at a reduced rate, stopping to repair and switching to standby on lost throughput, margin, safety, permits and spare-part lead time, routes the choice to the site owner within the stop-duration envelope, and schedules the work order and the rate plan only after approval.

How far it can goLevel 1. With safety at stake a person decides; it starts as a shadow brief.

The measureTime to decision. Also: throughput protected, safety deviations.

Opens nextA production reschedule, and a customer-promise change where the date is at risk.

Scorecard

Latency
Time to decision
Quality
Safety deviations
Adoption
Share of priority-1 notifications decided on the brief
Outcome
Throughput protected

Trading · decision chain

Buy a cargo, and the decisions it sets in motion

The decisionA trader sees a spread to buy an extra cargo against a monthly position limit. The purchase will need tank space, transport and an accrual downstream.

Who takes partThe trader and the head of trading; the terminal and logistics schedulers; the trading system and its limit checks.

What Aidecis doesChecks the commitment against the position limit and routes it to the head of trading. Once it is approved, opens the downstream decisions for tank allocation and barge nomination, each with its own owner, in one chain.

How far it can goLevel 1 for the trade itself; each downstream step can move up once it holds on the record.

The measurePosition within limits. Also: downstream decisions on time, demurrage avoided.

Opens nextTank allocation and a barge nomination, each with its own owner, in one chain.

Scorecard

Latency
Downstream decisions on time
Quality
Position within limits
Adoption
Share of downstream steps opened in the chain
Outcome
Demurrage avoided

The decision library

72 consequential decisions in twelve families.

Every consequential supply-chain decision Aidecis governs belongs to one of twelve families. In a guided decision assessment we map with you which decisions are yours, how they score and where to start.

Book a guided decision assessment

The library holds the structure of each decision, not the answer: your own limits, systems and history are added with you, and examples stay labelled illustrative until real cases prove them.

Built around your operating rules

Start with the decision that costs you the most when it goes wrong.

Use client-defined authority, policies and approved data. Keep people accountable as automation grows, and measure outcomes before increasing a bot's decision scope.

Build your business case